Rolec EV Connect

The Rolec EV Connect app is easy to use and provides straightforward configuration for both Installers and Owners. For Installers: Installation made simple… Configuring Rolec EV chargepoints and managing your installation projects has never been easier! Designed with installers in mind, the Rolec EV Connect app enables seamless chargepoint configuration in just a few taps. All you need is a phone equipped with a camera and Bluetooth and you’re good to go. As chargepoint configuration is carried out over Bluetooth, installers can use the app wherever the location. This means that even in the depths of an underground car park or a remote location, it’s still possible to carry out the configuration. • Create an Installer account to configure chargepoints. • Easily enable communication to the chosen chargepoint management system or app. • Perform test charge sessions on each connector. • Manage home and commercial installation projects. • Easily add a new chargepoint to an existing project in the future. • Add project notes, upload photos, and raise support requests. For Owners: Once installed, you can take control of your chargepoint’s settings This app is solely for the purpose of managing the chargepoint’s configuration settings. Your chosen chargepoint app will be required for operational functionality. • Connect to your chargepoint by either scanning the QR code or searching for nearby devices and entering the chargepoint’s Bluetooth password. • Adjust the chargepoint’s LED brightness, Wi-Fi and password settings plus more.