Preview
Description
Pedalweave plans a guitar pedalboard the way you will actually build it: to scale, on a real board, with every pedal checked against the power supply output it plugs into. LAY OUT YOUR BOARD TO SCALE - Start from 13 real Pedaltrain board sizes or enter your own measurements - Drag pedals into place; positions snap to 5 mm and pedals rotate 90° - Nudge a selected pedal in 5 mm steps or type an exact position; VoiceOver users can move pedals with actions - Overlaps and pedals hanging off the edge are flagged in red - Plug clearance check: warns when a jack has too little room for its plug before the next pedal (adjustable per board) - See how much of the surface you have used - Auto-arrange in signal order: the chain starts at the back right, snakes across the rows, and leaves room where jacks face each other PRINT IT AT FULL SIZE - Full-size template on US Letter or A4: the layout at 1:1 across several pages, with jack marks, page order, and 100 mm and 4 in check rulers - Tape the pages together and lay them on your board before you stick anything down CHECK THE POWER ON EVERY OUTPUT - Add your supply: Strymon Zuma or Ojai, Voodoo Lab Pedal Power 2 Plus, CIOKS DC7, Truetone 1 Spot Pro CS7, 1 Spot daisy chain, or build a custom supply - Switchable outputs keep the right current limit for each voltage (for example 9 V 500 mA, 12 V 375 mA, 18 V 250 mA) - Errors for overloaded outputs, voltage above a pedal's rating, too little voltage, AC/DC mismatch, a supply's combined limit, and center-positive pedals on outputs that share a ground (where a reversing cable would cause a short) - Warnings for outputs above 80% of their rating, supplies above 80% of their combined limit, center-positive pedals that need a reversing cable on an isolated output, digital pedals on a daisy chain, and pedals with no power source - Auto-assign gives each unplugged pedal its own compatible output and prefers outputs with headroom SIGNAL CHAIN AND PATCH CABLES - Drag to reorder the chain, or apply the conventional order by pedal type - Amp effects loop (4-cable method): put modulation, delay, or reverb between the amp's send and return; the chain, cable list, and rig sheet follow - Patch-cable lengths are worked out from the jack positions on your layout, rounded up to common stock lengths - A shopping list by length, the total cable for a solderless kit, and the number of plugs; stereo links count two cables GEAR AND COST - Library of popular pedals with dimensions, voltage, and current draw, plus size templates and your own custom pedals - Edit any spec to match your unit - Track prices for pedals, supplies, the board, and extras, split into owned and still to buy EXPORT AND BACKUP - PDF rig sheet with a scaled drawing, the chain, every output with its pedals, the cable list, and costs - CSV gear list for spreadsheets and plain-text rig sheet - One backup file holds every board; importing adds boards and never deletes anything EVERYTHING INCLUDED, ONE PURCHASE No subscription, no ads, no account, no tracking, no network. Your boards stay on your device. Works on iPhone and iPad. Pedalweave compares the values you enter and does not certify electrical compatibility. Library specs are typical published figures; check your own pedals' labels or manuals and confirm voltage, polarity, and current with each manufacturer before powering up.
What's New
Version 3.0 2026-11-20
Pedalweave 3.0 makes the power check safer and adds full-size printing. - Corrected library current draw: Boss CH-1 (55 mA), Boss DD-8 (100 mA), and EHX Canyon...Pedalweave 3.0 makes the power check safer and adds full-size printing. - Corrected library current draw: Boss CH-1 (55 mA), Boss DD-8 (100 mA), and EHX Canyon (150 mA) were listed too low, as was the Pedal Power 2 Plus 12 V rating (100 mA). Saved boards are updated only where you had not edited the value; a copy of your previous file is kept and the app lists every change. - Polarity: a center-positive pedal on an output that shares a ground with other pedals is now an error, because a reversing cable there causes a short. The Isolated setting now counts. - Full-size template: print your layout at 1:1 on Letter or A4 with check rulers. - Plug clearance check, and auto-arrange leaves room where jacks face each other. - Amp effects loop (4-cable method) in the chain, cable list, rig sheet, and CSV. - Nudge pedals in 5 mm steps, type an exact position, and move pedals with VoiceOver. - Auto-assign prefers outputs with headroom; supplies warn above 80% of their combined limit. - Removing a pedal now asks first. If a saved file ever cannot be read, it is kept aside instead of being replaced. Technical Analysis
Package Overview Basic metadata
Bundle ID
com.realbobcorbin.Pedalweave Current Version 3.0
Minimum iOS 17.0
Package Size App Store Size
Package Metadata 0 / 0 version records
Detailed binary, privacy manifest, framework, and Info.plist results have not been indexed for this package yet. The verified App Store and archive metadata above remains available.
Price History (USA store)
5 recorded price change points. These are historical observations, not a guarantee of the current price.
| Recorded at | Price | Currency |
|---|---|---|
| 4.99 | USD | |
| 0.0 | USD | |
| 3.99 | USD | |
| 4.99 | USD | |
| 3.99 | USD |
Developer Information
Known Version Records
0 version records with stored package metadata
Stored metadata does not guarantee a package is currently available to download.
| Details | Version / IDs | Version date | Action |
|---|