Conduit Kit: Bend, Fill, Box App Icon

Conduit Kit: Bend, Fill, Box

Utilities • RAINBOW TREE LLC
4+ v1.0.2 Recorded price: Free App Store →
IPA Analysis
Technical Specs
Bundle ID work.rainbowtree.DensenkanKeisan
Version 1.0.2
App Store Size 6.6 MB
Minimum iOS 17.0
Devices iPhone, iPad, iPod touch
Catalog release date 2026-08-28
Latest recorded version date 2026-10-16
Features & Support
Advisory 4+
Languages (2)
EN, JA
Top In App Purchases
No In App Purchases Listed

Preview

Conduit Kit: Bend, Fill, Box screenshot 1 Conduit Kit: Bend, Fill, Box screenshot 2 Conduit Kit: Bend, Fill, Box screenshot 3 Conduit Kit: Bend, Fill, Box screenshot 4 Conduit Kit: Bend, Fill, Box screenshot 5

Description

Know the length of the piece before you cut it. Pick the conduit and the kind of bend, type the dimensions — you get the marks measured from the end of the pipe and the cut length. Lay a tape on it and mark. ■ If it cannot be made, you hear it first The app finds the dimensions where the arcs would overlap (at 45°, an offset smaller than 2.688 in) before you bend, and switches you to an angle that works in one tap. ■ Kinds of bend 90° stub, custom angle, offset, 3-point saddle, 4-point saddle and parallel runs. Marks can be measured to the start of the bend, the center of the arc, or the theoretical corner. ■ Bend radius against the code Inside radius is shown with its source (NEC Chapter 9, Table 2 / Articles 342.24, 344.24, 358.24). The app does not reproduce tables — it cites them. ■ Not limited to a lookup table Fill is computed from the conduit ID and the conductor OD, so any size works, listed or not. NEC Chapter 9, Table 1. ■ Match the app to your bender Bend one 90° and measure the stub-up. That gives the real centerline radius of your tool, and every cut length after that matches what you actually make. ■ Keep it per job, hand it over on paper Add bends and sizing to a job and the take-off sheet builds itself. Sticks are counted by packing the longest pieces first, so the count is never short the way total ÷ stick length would be. Export it as a PDF. ■ Works with no connection Everything is computed on the device. Job records stay on this device only — they are not stored in iCloud, so they cannot move to a new phone. ■ About pricing The 90° stub (cut length and the radius check) and conduit size selection are free, always. Offsets, saddles, custom angles, parallel runs, pull box sizing, bender calibration, job records and the take-off PDF are a one-time purchase. There is no subscription. ■ Units and standards Switch between inch (NEC, North America) and mm (JIS, Japan). Conductor sizing is not offered in North America, because ampacity is given as a table (NEC Table 310.16) and showing only the voltage-drop half would give an answer that is too small. What the app shows is a guide for installation. Compliance and the final call belong to the job's own standards and a licensed electrician. Terms of Use: https://rainbowtree.work/app/terms Privacy Policy: https://rainbowtree.work/privacy/densenkan-keisan.html

What's New

Version 1.0.2 2026-10-16
Thank you for using Conduit Kit. In this update, we reviewed how the app is introduced on the App Store. How the app works, and your jobs, saved benders and se...

Technical Analysis

Package Overview Basic metadata
Bundle ID work.rainbowtree.DensenkanKeisan
Current Version 1.0.2
Minimum iOS 17.0
Package Size App Store Size
Package Metadata 0 / 0 version records
Detailed binary, privacy manifest, framework, and Info.plist results have not been indexed for this package yet. The verified App Store and archive metadata above remains available.

Known Version Records

0 version records with stored package metadata

Stored metadata does not guarantee a package is currently available to download.

Archived versions of Conduit Kit: Bend, Fill, Box
Details Version / IDs Version date Action