PRV8 Config

Set up iPhone and iPad for a private 5G or LTE network, on site, without an MDM server. PRV8 Config builds Apple's Cellular Private Network configuration profile from settings you choose, and installs it on the device you are holding. **Draw the coverage, don't type coordinates.** Drop geofences by pinning them on a map. Adjust each radius by hand and watch the circle change. iOS uses those fences to switch to the private network when the device arrives on site. **Everything Apple's payload supports.** Data set name and version, 5G standalone, preferring private cellular over Wi-Fi, and the 3GPP Network and CSG identifiers on iOS 18 and later. Up to five networks, up to a thousand geofences each, checked against Apple's limits before anything is installed. **See what you are installing.** Inspect the profile XML before it goes anywhere. Reinstalling replaces the profile already on the device instead of stacking another one, and version numbers bump themselves when a data set changes. **Confirm it is working.** The Diagnostics tab reads the radio technology in use — LTE, 5G non-standalone, or 5G standalone — and says whether it matches what your profile expects. Measure download, upload, ping, jitter and latency under load with Cloudflare or ndt7, including against a measurement server inside your own network. Every test is kept with the technology, the geofence and the position it was taken in, and exports as CSV. **Private by construction.** No account, no cloud, no analytics. Configurations never leave your device. The profile is served over the device's own loopback address, so it is never uploaded anywhere. Requires a SIM or eSIM provisioned for the private network.