Silvia Ready: meCoffee PID

Silvia Ready tells you when your espresso machine is ready, without opening the app. It connects over Bluetooth to the meCoffee PID controller in your Rancilio Silvia and sends three notifications: • Switched on: the moment the machine powers up, including by the controller's wake-up timer. • Boiler ready: once the boiler has held its brew temperature. • Fully warmed up: after the warm-up time you choose, when the group head and portafilter are hot too. While the app is open you see the boiler temperature against the setpoint, how long the machine has been on and a shot timer. The sensor sits on the boiler, and the water reaching the coffee is cooler. Set a temperature adjustment once and Silvia Ready shows and announces the adjusted temperature everywhere. No meCoffee yet? Tap "Try the demo" to see a simulated machine heat up and pull shots. CONTROLLER SETTINGS Read and change the settings stored on the meCoffee controller: • Brew and steam temperature • PID: P, I, D, wind-down limits and polling interval • Pre-infusion pump and pause time • Pressure profile and maximum shot time • Auto shut-off, wake-up and switch-off timers Every setting shows the meCoffee default so you can always go back. FREE, WITH ONE UPGRADE The live temperature, shot timer, controller settings, temperature adjustment and the demo are free. Ready Notifications (switched on, boiler ready, fully warmed up, also with the app closed) is a one-time purchase. No subscription. PRIVATE No account, no ads, no analytics. Everything stays between your iPhone and your machine. REQUIREMENTS • meCoffee PID with the Bluetooth LE module • The controller accepts one Bluetooth connection at a time, so close other apps connected to it. Silvia Ready is an independent app. It is not affiliated with or endorsed by meCoffee or Rancilio.