RainoX Farm App

RainoX Farm App is a workbench log for people who run one 3D printer or a whole shelf of them. It keeps the numbers a slicer forgets the moment a job ends: how many grams are left on each spool, how many hours each nozzle has run, which prints came off the bed clean and which ones went in the bin. Log a print once and the rest follows. The spool loses its grams, the nozzle gains its hours, and the bench adds up the material and the money. WHAT YOU GET • Printers — every machine with its kinematics, nozzle size and a wear bar that fills with each job; replace a nozzle and the counter starts again • Filament — a shelf of spools with a ring showing the weight left, the material, color, price and where the reel is stored, with a drying reminder for materials that take on moisture • Prints — a job log with printer, spools, grams, time, layer height, infill, temperatures, speed and result, plus a photo of the finished part or the failure • Failures — mark a job as scrapped and pick the reason: warping, clog, layer shift and more • Bench — output week by week, success rate by material, and what each failure reason cost you in scrapped filament • Clinic — twelve common print defects, from stringing to elephant foot, with a short set of questions that reorders the likely causes for your case and tells you what to check first • Materials — a reference card for PLA, PETG, ABS, ASA, TPU, nylon and polycarbonate, with a side-by-side comparison There is no account and no cloud. Everything you log stays on your device.