FIELD ASSISTANT

Using Field Assistant App to configure drivers for luminaires via NFC interface, you can stepless set output current of LEDVANCE NFC drivers—no cables or no programming tool required. Instantly copy settings from one driver to others identical drivers, saving time and ensuring consistency across your lighting projects. Set the driver’s parameters: 1. LED driver output current Set the LED output current (in mA) to adjust the brightness 2. Output Level in DC Operation Set level in percentage for example 15% to adjust the brightness of emergency lighting. 3. Set operating mode (available for DALI driver) Selection of the device operating mode (DALI, Corridor Function or Push Dim) 4. Configuration of the Corridor Function Including Presence Level, Absence Level, Fade in Time, Fade out Time, Run on Time. Key Features: 1. Stepless current setting via NFC for precise driver configuration for your luminaires, no cables or no programming tool required. 2. Copy and paste driver settings to identical drives This saves time when replacing fault driver and when config several identical luminaires. This also ensure consistency across your lighting projects. 3. Designed for installers and OEM customers to improve work efficiency and product quality 4. Retrieve further product information about LEDVANCE LED drivers, simply scan the NFC tag The following prerequisites must be met before you can use the Field Assistant app: 1. Use LEDVANCE LED driver with NFC interface. 2. Your mobile phone must support NFC. 3. Please make sure NFC is enabled when using this app. An Internet connection is not necessary for Using this App. The Field Assistant app itself is free of charge.