Measure Volume

This application is a research demonstration developed in collaboration with National Taiwan University Hospital and approved by the Institutional Review Board (IRB). It is not intended for general-purpose use. In the beginning, the tester must stand up and put hands on waist. Because the volume of the left and right sides needs to be calculated separately, please put the tester in the center of the screen according to the vertical reference line, and the left and right sides of the breast must be within the camera screen but not too far away from the screen edge. There are two red reference points on the screen. Please make the left red point on the left clavicle near the left upper arm. And the same on the right. Make the center reference circle green before the shot. (The reference circle will be turned to green if the distance to the left clavicle is equal to the distance to the right clavicle. Then click the center "camera" icon to save the 3D image. Then press the right "folder" icon to view the 3D image you just saved, and press the second from the fright "ruler" icon to measure breast volume automatically! The unit is cm^3 (c.c.). You can also measure the length/area of objects by clicking the screen to set the measurement range. p.s. Measure Size uses LiDAR to detect the 3D position of objects. Please launch this application using iPhone 12 Pro or later / iPad Pro 2nd or later. Try not to wear clothes to measure so as not to affect the volume judgment, and the hands should be placed behind the chest and should not be raised above the chest so as not to affect the volume judgment. I use two bowls instead of the photo of real breast volume measurement because of patient privacy and pornography issues, and if real surgical photos are used in Apple store, there will be the above doubts. In addition, because the volume of the bowls is known, we can tell users that we can measure the volume precisely. However, our app can be applied to both situations because the measurement method is the same.