M32 Patch

M32 Patch puts Midas M32 and Behringer X32 routing in your pocket. Connect over your local network and edit input, output, and USB card routing with clear visual matrices—without fighting the desk’s small screen. INPUT ROUTING See all 40 destinations at a glance: channel faders 1–32, Aux inputs, and USB L/R. Tap to assign sources (Local, AES50-A/B, Card, Aux In, USB). Apply your matrix to the desk or import the current state from the console. The app respects User In mode and shows when the desk is using block routing instead of per-channel user routing. OUTPUT ROUTING Route buses, matrices, mains, and more to Local outputs, AES50 sends, Aux outs, and Card USB when available. Full matrix view with the same apply/import workflow and User Out awareness. CARD USB When your desk has a USB card installed, patch Card In, multichannel Card Out, and bus assignments on the first USB outputs—mirroring the workflow you expect from a desktop routing tool. DESK SYNC • Apply to desk — send your matrix and activate User In/Out as needed • Import from desk — read live routing without overwriting until you choose • Hardware badges for Local, AES50-A/B, and Card status NETWORK Enter the console IP manually or scan your subnet to discover M32/X32 units on the same network. Optimized for real-world show networks. PRESETS Save and load routing presets to speed up show prep and recalls. BUILT FOR THE FIELD Designed for iPhone and iPad. Interface in multiple languages. Help documentation included. REQUIREMENTS • Midas M32 or Behringer X32 with firmware 4.0 or later (User In / User Out routing) • iPhone or iPad on the same local network as the console • OSC control port (default 10023) NOTE M32 Patch is the iOS companion for live and installed sound workflows. It does not replace the full desktop experience—it gives you fast, visual routing control when you’re away from the FOH Mac. Questions or feedback: contact via the developer website listed on this page.