iSpeaker Cleaner: Water Eject

iSpeaker Cleaner plays low-frequency tones that help push water out of your iPhone or iPad speaker grille and shake loose dust. SMART CLEANING Cycles of 30 to 60 seconds. Normal and Water modes are free; Deep, Auto and Custom are Pro. Auto listens to the room for a few seconds and picks a cycle; Custom plays the settings you choose. WATER EJECTION Got your phone wet? A low tone helps move water sitting in the speaker grille. It does not dry the inside of the phone or the charging port. TONE GENERATOR AND SOUND LEVEL Play any tone from 20 Hz to 20 kHz in four waveforms, and read a relative sound level from the microphone. HISTORY, REMINDERS AND SIRI Track your sessions, keep a cleaning streak, set reminders, or say "Eject water with iSpeaker Cleaner". FREE AND PRO Free: Smart Clean (Normal and Water), the manual tone generator, the sound level meter, history and reminders, and 2 Water Ejections plus one more for each short video you watch. Pro is a one-time purchase, with no subscription: unlimited Water Ejection, Deep, Auto and Custom modes, the frequency sweep, and no ads. COMMON QUESTIONS Does it really get water out? A low-frequency tone makes the speaker cone move hard enough to push droplets out of the grille. It helps with water sitting in the speaker; it does nothing for water anywhere else in the phone. And dust? Vibration can shake loose dust free. It will not pull out packed-in lint or anything wedged in the grille — for that you need a soft brush and patience, not a tone. If my phone got really wet? Turn it off and let it dry. This app moves water out of a speaker grille; it is not a rescue for a soaked phone. Does it need internet or an account? Neither. Does it work on iPad? Yes. Terms of Use: https://ghapps1.wordpress.com/terms-condition/ Privacy Policy: https://ghapps1.wordpress.com/privacy-policy/