CCBOT Rover

CCBOT Rover is the companion app for compatible CCBOT Rover robots. Connect your iPhone or iPad to the robot’s local Wi‑Fi network and access camera views, driving controls, maps, and diagnostics from one landscape dashboard. SEE YOUR ROBOT’S SURROUNDINGS View the robot’s camera feed and available LiDAR data. Monitor reported speed, heading, orientation, and positioning status while operating the robot. CONTROL AND PLAN Use manual driving controls and adjust drive power. Review route and work-area plans, define no-go zones, and monitor supported autonomous operations. Available features depend on the connected robot, sensors, and robot software. CHECK CONNECTIONS AND STATUS Select the robot connection profile, reconnect to the local CCBOT bridge, inspect sensor and system status, and run self-checks. Stop controls are available as part of the operating workflow. LOCAL ACCOUNT AND DATA The app supports local account creation and sign-in. Account credentials, profile data, settings, and session data are stored on the device. Users can permanently delete their local account and associated local data from Account/Settings. HARDWARE AND NETWORK REQUIREMENTS Compatible CCBOT Rover hardware and the CCBOT robot bridge are required for live video, telemetry, sensor data, and movement. Join the robot’s Wi‑Fi network in iOS Settings before connecting in the app. This is a local-network robot companion, not an internet-based remote-control service. Map imagery may require internet access. SAFE OPERATION Operate only in a clear, suitable area. Keep the robot in sight and keep the physical emergency stop within reach. Camera views, sensor readings, network connections, and app stop commands depend on the connection and do not replace direct supervision or the robot’s physical safety controls. Support and setup help: https://ccbotics.com/contact.html