Beacon Walker: iBeacon Tools

Test your iBeacon app without a drawer full of beacons. Beacon Walker turns your iPhone, iPad or Mac into the beacons you are building for, and scans what is in range. SIMULATE - Advertise any UUID, major and minor. - Build a walk: a list of beacons that each advertise for as long as you set, then hand over to the next. Play, pause and skip through it, or keep a single beacon on. - Set beacons up by hand, or load and share them as JSON files. - Keep the screen awake while you walk the floor, and get a notification if iOS pauses advertising because you left the app. SCAN - See every beacon in range for a UUID, with major, minor and signal strength, nearest first. - Every scan is recorded. Export it as a CSV file with one row per reading: time, UUID, major, minor, RSSI, estimated distance and proximity. ON EVERY DEVICE - iPhone, iPad and Mac. On the Mac, scan for every beacon nearby regardless of UUID, and follow a running simulation or scan from the menu bar. TRY IT FREE Simulate up to 5 beacons and run a 30-second demo of simulation and scanning. BeaconWalker Plus removes the limits and adds CSV export, monthly, yearly or once for life. Good to know: iOS only advertises beacons while Beacon Walker is open with the screen on. On iPhone and iPad, scanning needs the beacons' UUID. iBeacon is a trademark of Apple Inc., registered in the U.S. and other countries. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/